4" long, 1" diameter and 1.25 Oz size, Salty's own natural air dried Northern White Pine Wood,
Uses .092 Magnum Stainless Steel Screw Eyes for maximum durability.
Pull tested to over 310 lbs when glued with epoxy!
All kits are sanded out to 150 grit and require minimal if any sanding. All holes are pre-drilled for easy assembly.
All components are included except for split rings and hooks which we recommend
1/0 treble hooks for the belly and tail of this lure.
We use only USA made components in our kits!
Very simple twitching action on this lure, excellent kit for starting out, and VERY good for use with kids!
Kit requires the use of epoxy to glue the special lure screw eyes. When properly installed a screw eye will outperform a through wired lure!
Can be painted with Salty's Lure Paint, Createx Air brush paints, or with acrylic paints and a small brush from AC Moore,
let them dry thoroughly and coat with a few coats of clear spray paint or brush with epoxy etc in thin coats for more durability.
Lures need to be finish sealed to prevent water intrusion. More information on our free lure forum linked above.
We carry a full line of epoxy topcoats, hooks, paint, etc here: Lure Hardware
WARNING: These products can expose you to chemicals including Wood Dust & Lead, which is known to the State of California
to cause cancer and or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Saltys is a small business and exempt from California Proposition 65 warning requirements,
but choose to provide them voluntarily for known chemicals.
Wash hands after handling, DO NOT smoke or eat with contaminated hands! Keep away from children and do not ingest! USE COMMON SENSE!