1.5" long and 1.25 Oz size, stainless steel thru-wired this is a great little swimmer! 1/2" holographic molded eyes! All kits are sanded out to 150 grit and require minimal sanding. All components are included except for split rings and hooks which we recommend 1/0-2/0 treble hook for the belly and a dressed stub on the tail of this lure. We do not recommend using a tail hook on this swimmer as it will foul. We use only USA made components in our kits!
Very simple retrieve on this lure, it will tail wag right on top. This swimmer is a good intermediate kit. It requires gluing the lip in, minor sanding, and painting/finishing. These kits are all made on our dedicated kit cnc machines and drilled with precision and duplication second to none!
Can be painted with Salty's Lure Paint, Createx Air brush paints, or with acrylic paints and a small brush from AC Moore, let them dry thoroughly and coat with a few coats of clear spray paint or brush with epoxy etc in thin coats for more durability. Lures need to be finish sealed to prevent water intrusion. More information on our free lure forum linked above. We carry a full line of epoxy topcoats, hooks, paint, etc here: Lure Hardware
WARNING: These products can expose you to chemicals including Wood Dust & Lead, which is known to the State of California
to cause cancer and or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Saltys is a small business and exempt from California Proposition 65 warning requirements,
but choose to provide them voluntarily for known chemicals.Wash hands after handling, DO NOT smoke or eat with contaminated hands! Keep away from children and do not ingest! USE COMMON SENSE!