1.5x6 ALASKAN YELLOW CEDAR TURNING SQUARE DRILLED

$3.79
15X6ALASKANYELLOWCEDARSQUAREDRILLED
In stock
+
1.5x6" Yellow Cedar Turning Squares, straight grain.
Drilled 3/16" through end to end on center. Works with the nose & tail grommets found on our hardware page.

Great for big pencil poppers, floating needles, swimmers, spooks, etc.

WARNING: Sanding these products can expose you to Wood Dust, which is known to the
State of California to cause cancer. For more information go to
www.P65Warnings.ca.gov

Saltys is a small business and exempt from California Proposition 65 warning requirements,
but choose to provide them voluntarily for known chemicals per California law.
Wash hands after handling, DO NOT smoke or eat with contaminated hands!
Keep away from children and do not ingest! USE COMMON SENSE!


Other sizes available on other pages

Alaskan Yellow Cedar Turning blanks will sand out to a very fine finish.
Since AYC is similar to POC or Red Cedar the same precautions apply in regards to turning safety and dust control.

Remember to use good dust collection or a respirator when sanding any kind of cedar.
They contain a very defined crystalline structure which is bad to inhale. All cedars are this way.
Also make sure you use a good quality hiding primer so you don't have problems with bleeding which are prevalent with all cedars.

Yellow cedar is one of the most enjoyable woods to not only turn but work with and even fish.
It's very buoyant with a specific gravity of around .55 but at the same time it's very dense and slow growing.