2.75 Oz A40 Sr Metal Lip Swimmer Lure Kits
7 3/4" long and 2.75 Oz size, stainless steel thru-wired this is a great swimmer! Your choice of holographic eyes or not! All kits are sanded out to 150 grit and require minimal sanding.
The belly grommet holes are recessed flat, and kits are weighted with one belly weight only-can easily be re-drilled for heavier weight. This swimmer is a copy of an original Danny Pichney Atom 40 Style Swimmer lure. All components are included except for split rings and hooks which we recommend a pair of VMC 3/0 treble hooks for the belly and 6/0 Siwash or a Bucktail stub on the tail of this lure. We use only USA made components in our kits!
Very simple retrieve on this lure, it will tail wag right on top, and will dive on faster retrieve. This swimmer is a good intermediate kit. It requires gluing the lip in, gluing the weight in, minor sanding, and painting/finishing. These kits are all turned on our dedicated kit cnc machine and drilled with precision and duplication second to none!
Can be painted with Salty's Lure Paint, Createx Air brush paints, or with acrylic paints and a small brush from AC Moore,
let them dry thoroughly and coat with a few coats of clear spray paint or brush with epoxy etc in thin coats for more durability.
Lures need to be finish sealed to prevent water intrusion. Checkout our topcoats, they make a great wood sealer and Top Coat!Lures need to be finish sealed to prevent water intrusion. More information on our free lure forum linked above.
We carry a full line of epoxy topcoats, hooks, paint, etc here: Lure Hardware
WARNING: These products can expose you to chemicals including Wood Dust & Lead, which is known to the State of California
to cause cancer and or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
USE COMMON SENSE!
Lures sold individually.