Salty's Through-hole lure drilling bits

Write a review
In stock

We have been using these bits for years, they work very well for drilling the through wire hole in your lures or raw blanks. Recommend high speed and if done on a drill press we highly recommend holding the lure or blank with a pair of vise grips or pliers. All of our drilling is done on a high speed custom cnc machine and it's not uncommon to run these bits for several thousand lures before they need sharpening. Larger size will have less error when drilling through a long piece of wood. These work equally well on cedars or hardwoods. Remember to clean your chips every 1-2" for a better drill. Parabolic flutes are 6" long on all size bits with an overall length of 8". Recommend starting the hole with a shorter drill bit to make the hole more accurate also.

No additional discounts apply to drill bits. All tools are non-returnable.

Use extreme caution drilling with these bits. They are a fast spiral and can grab and go through wood very easily if not careful. Never hold a lure or piece of wood by hand where a drill could accidentally come out the side of the wood or lure. Use smallest size possible to redrill glued in weights on through-drilled lures.

New for 2021 1/8" bits. Much easier drilling through belly weights!

WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to
Saltys is a small business and exempt from California Proposition 65 warning requirements, but choose to provide them voluntarily for known chemicals per California law.

Wash hands after handling, DO NOT smoke or eat with contaminated hands! Keep away from children and do not ingest! USE COMMON SENSE!

No reviews found