2 Oz "The Gravedigger" Wood Lure Kit

Write a review
Sportfishing FET Applicable
(+0.85 Federal Excise Tax)
In stock

2 Oz "The Gravedigger" Wood Lure Kit

5 1/4" long and 2 Oz size, stainless steel thru-wired this is a great Sandeel imitation needlefish!
1/2" molded eyes and an aerodynamic long distance casting design!
All components are included except for split rings and hooks which we recommend
VMC 2/0 treble hook for the belly and a 5/0 Dressed Siwash on the tail of this lure.
We use only USA made components in our kits!

Very simple retrieve on this lure, either walk it up top, or let it sink and fish the bottom.
This needlefish is an advanced kit. It requires installing lead weights with epoxy and re-drilling the thru-wire with a narrow diameter drill bit.
We recommend this is done with a battery drill or hand drill for safety. It requires sealing, minor sanding, and painting/finishing.
These kits are all turned on our dedicated kit cnc machine and drilled with precision and duplication second to none!

Note there is not currently a pictorial for assembly of this lure. It's a very simple lure to assemble. The weight goes in the front belly hole and the belly hook goes in the rear belly hole. Holes are different depths. 

Can be painted with Salty's Lure Paint, Createx Air brush paints, or with acrylic paints and a small brush from AC Moore,
let them dry thoroughly and coat with a few coats of clear spray paint or brush with epoxy etc in thin coats for more durability.
Lures need to be finish sealed to prevent water intrusion. More information on our free lure forum linked above.
We carry a full line of epoxy topcoats, hooks, paint, etc here: Lure Hardware

WARNING: These products can expose you to chemicals including Wood Dust & Lead, which is known to the State of California

to cause cancer and or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Saltys is a small business and exempt from California Proposition 65 warning requirements,

but choose to provide them voluntarily for known chemicals.Wash hands after handling, DO NOT smoke or eat with contaminated hands! Keep away from children and do not ingest! USE COMMON SENSE!

Our CNC machine cuts these bodies at 2 per minute.

Then they are hand sanded on our high speed production lathe to 150 grit.

All the drilling functions are done by custom designed CNC machines built in our shop.

Click here for a basic lure assembly pictorial-work in progress.

No reviews found