2 Oz Topwater Agitator Lure Kit

Everyone knows the "Whopper Plopper" lures, made popular for not only freshwater but saltwater fishing as well!  We had looked at making some kits years ago and the tails were the killer to make in bulk. Fast forward to today, we've now got the capability to 3D print even complete fishing lures. Thinking out-of-the-box, and with the success of our easy to assemble and finish kits, we came up with the idea of making an all new completely hybrid lure kit and we decided to look at this some time ago.

We ended up licensing the files to be able to sell and make these commercially and we started making test samples this summer. I've finally gotten these to the point where they have the action and castability that worked the best that I've seen out of anything on the market today. This kit is the first of its kind to utilize a wood turned body, and a strong 3D printed tail that rotates and gives you the great plop plop plop action right on top!

These kits cast incredibly well and are fairly aerodynamic. The two ounce agitator is the first of at least three sizes that we'll be making over the next year.

This lure will work great for saltwater or freshwater. Tiger Musky, Northern Pike, Stripers, Bluefish, and more!

All kits are sanded out to 150 grit and require minimal if any sanding.
All components are included except for split rings and hooks which we recommend 2/0 treble hooks for the belly and tail of this lure with 5H size split rings. 

We use only USA made components in our kits!
Nickel plated belly grommets help protect the lure from damage,
the extra strong .065 stainless steel wire will stand up to most any fish in your lake or the ocean!

Reel in steady and in a straight line. Not too fast or too slow.
As you are reeling the tail will spin and create a plop plop plop noise along with the beautiful V wake that drives fish wild! Stop 5 to 6 cranks and pause for a second and then start right back up again and the takes are absolutely vicious!

This is a moderate skill level kit!
Can be painted with spray cans, Createx Air brush paints, or with acrylic paints and a small brush from AC Moore,

let them dry thoroughly and coat with a few coats of clear spray paint or brush with epoxy etc in thin coats for more durability.
Lures need to be finish sealed to prevent water intrusion. More information on our free lure forum linked above.
We carry a full line of epoxy topcoats, hooks, paint, etc here: Lure Hardware

WARNING: These products can expose you to chemicals including Wood Dust & Lead, 

which is known to the State of California to cause cancer and or birth defects or other reproductive harm. 

For more information go to www.P65Warnings.ca.gov. 

Salty's® is a small business and exempt from California Proposition 65 warning requirements, but choose to provide them voluntarily for known chemicals. 

Wash hands after handling, DO NOT smoke or eat with contaminated hands! Keep away from children and do not ingest! USE COMMON SENSE!