2 Oz Wad Needlefish Wood Lure Kit

6.5" long and 2 Oz size, stainless steel thru-wired this is a super needlefish!
3/8" molded eyes and all kits are sanded out to 150 grit and require minimal fine sanding.
All components are included except for split rings and hooks which we recommend VMC 3/0 treble hook
for the belly and a 3/0 dressed treble or 5/0 or 6/0 Siwash on the tail of this lure.
We use only USA made components in our kits!

Very simple retrieve on this lure, either walk it up top, or let it sink and fish the bottom.
This needlefish is an advanced kit. It requires installing multiple lead weights with epoxy and re-drilling the thru-wire with a 5/32x4" drill bit.
We recommend this is done with a battery drill or hand drill for safety. It requires sealing, minor sanding, and painting/finishing.
These kits are all turned on our dedicated kit cnc machine and drilled with precision and duplication second to none!

Can be painted with Salty's® Lure Paint, Createx Air brush paints, or with acrylic paints and a small brush from AC Moore,
let them dry thoroughly and coat with a few coats of clear spray paint or brush with epoxy etc in thin coats for more durability.
Lures need to be finish sealed to prevent water intrusion. More information on our free lure forum linked above.
We carry a full line of epoxy topcoats, hooks, paint, etc here: Lure Hardware

WARNING: These products can expose you to chemicals including Wood Dust & Lead, which is known to the State of California

to cause cancer and or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Salty's® is a small business and exempt from California Proposition 65 warning requirements,

but choose to provide them voluntarily for known chemicals.Wash hands after handling, DO NOT smoke or eat with contaminated hands! Keep away from children and do not ingest! USE COMMON SENSE!